Wrinkle Anti

Q7 Removable Adhesive Wall Posters & Graphics Installation Suggestions CHOOSE YOUR SPOT TO SHOW YOUR PROMOTIONS! Pick a smooth, dry and clean surface The most traditional places are on any wall, door, window or car (do not block windshield). When placing your Wall Graphic on a standard painted wall, make sure the wall had been previously primed prior to painting (otherwise the paint may possibly come off). If you place your Wall Graphic on a pebbly, textured or porous surface (ie brick or cement walls), you may receive poor results, but in most cases it has worked. We also suggest not placing it above fireplaces. CLEAN IT BEFORE YOU STICK IT Use a warm, damp cloth or sponge to clean the wall surface or window and allow it to completely dry. Youcan remove and replace the Wall Graphic over and over again, however, once the adhesive collects too much dust, dirt or fibers it will become less effective, and the Wall Graphic may not stick as well to your surface. PEEL AND STICK IT Depending on the size of your Wall Graphic it may be helpful to have two people install it. Try not to let the adhesive come together or the Wall Graphic to fold up against itself. Its okay if it does, you can separate it by carefully pulling it apart so you do not ruin the print. Start at the top of your Wall Graphic and pull down approximately 2-3 of the backer. By lightly pressing and smoothing, apply the 2-3 exposed adhesive area of your Wall Graphic to your chosen surface area. Then continue to …